Laserjet Toner

How To Properly Remanufacture Your HP 2500-2550 Color Toner Cartridges In Just 45 Easy Steps

Did you know?

Hewlett Packard Color LaserJet 2500 smart technology print cartridges offer great print quality and reliable performance for affordable, professional quality color printing.

It also has new advanced toner, ease-of-use features and smart technology has been a plus to the end consumer.

Here are your Step-by-Step "How-to-Remanufacture" the HP 2500 Color Laserjet Toner Printer Cartridge Instructions:

Let's get straight to the point, no beating around the bush during this lecture.

First, you will need the necessary Tools & Supplies Required:

Tools & Supplies Required:

#2 Phillips Head Screwdriver (tool) #0 Phillips Head Screwdriver (tool) Small Flat-blade Screwdriver (tool) Silicon (tool) X-acto Knife (tool) Cotton Swab (tool) 99% Isopropyl Alcohol (supply) Lint-free Cloth (supply) Toner Seal Here you will also be provided with the OEM (original equipment manufacturer) information:

HP 2500:

Part Numbers: C9700A (black), C9701A (cyan), C9702A (yellow)and C9703A (magenta) OEM Gram Load: 1100 grams Yield @ 5% coverage: 20, 000 pages / min:32 Resolution: 1200dpi (dots per inch) Below are your 45 easy steps to know how to remanufacture your HP 2500 LaserJet C9700A (black), C9701A (cyan), C9702A (yellow), & C9703A (magenta) toner cartridges.

Step #1:

Gently set your toner cartridge on your workstation with the toner hopper contact end plate facing you.

Step #2:

Take your #2 Phillips-head screwdriver and remove the two black screws from the end plate.

Note: The screw located just below the developer roller is longer than the other screws on the cartridge. Make sure the correct screw is used when reassembling the cartridge otherwise the screw can jam and cause an invalid toner cartridge.

Step #3:

Now, take out your #0 Phillips-head screwdriver and remove the small screw from the contact end plate.

Step #4:

You should be able to slide the end plate away from the toner cartridge.

Step #5:

Simply rotate the cartridge at 180 degrees. Remove the 2 screws holding the gear housing end cap to the toner hopper.

Step #6:

Gently slide the gear housing end cap from the toner hopper.

Step #7:

Remove the 5 gears from the end of the cartridge leaving the toner hopper agitator drive gear.

Step #8:

The developer and roller end plate is held in place by 2 screws.

Step #9:

Take your #0 Phillips-head screwdriver and remove the small silver screw.

Step #10:

You can now slide the developer roller end plate from the side of the cartridge.

Step #11:

Whatever you do - DO NOT lose the round bearing that sits inside the developer end plate.

Step #12:

Rotate the cartridge at 180 degrees. Remove the screw holding the developer roller end plate to the hopper.

Step #13:

Remove the end plate while holding the developer roller.

Step #14:

Remove the developer roller. Next, remove the developer roller bearings from the ends of each roller.

Note: Again, whatever you do - DO NOT lose the round bearing that sits inside the end plate.

Note: Be sure to clean the developer using a lint-free cloth along with some alcohol.

Step #15:

In order to lift the top cover of the hopper, you need to lift the back of the cover off the positioning post located on the backside of the hopper.

Step #16:

At this point you can lift off the top cover.

Step #17:

Simply remove the 2 screws holding the doctor blade.

Step #18:

By Joseph Mercado - Joseph Mercado is an open-minded, leading self-motivator based upon positive-self influence. The personal philosophy of Joseph is what drives him into the next century of success. His teachings ignite his m...

Next page: Cheap Hp Laserjet Toner

Bookmark/Share This Page:

HP C3906A (HP 06A) Compatible Toner For Use With The HP LaserJet 5L, 6L, 3100, 3150 Printers

This is our new compatible brand toner cartridge replacement that replaces HP C3906A. Our high quality aftermarket toner is unconditionally guaranteed to satisfy the most demanding print job. Use our compatible HP C3906A toner cartridge with the HP LaserJet 3100se, 3100xi, 3150, 3150se, 3150xi, 5L, 5L Xtra, 5LFS, 6L, 6Lse & 6Lxi laser printers from Hewlett Packard. Our manufacturing partners build every C3906A toner replacement cartridge with stringent quality control to provide you with results you can count on, page after page. Our high quality products are designed to be maintenance free to save you time and the inherent savings of using a compatible replacement cartridge produces the lowest overall page cost. Our compatible brand toner is built in an ISO 9001 certified factory for quality you can count on for home, home office and office use. Our manufacturing partners have worked to provide you with a product that is reliable and trouble free. That, coupled with our aggressive pricing, provide you with the tools you will need to make an intelligent buying decision for your HP C3906A toner purchase. Purchase your HP C3906A compatible toner cartridge with confidence today!

Office Product: New Compatible Brand Toner Unconditionally Guaranteed, HP C3906A Aftermarket Toner Saves 30-50% Off HP Brand, 2,500 Page Output At 5% Page Coverage, Manufactured In An ISO9001 Certified Factory To Meet International Standards, All In One Toner Cartridge - No Need To Purchase A Drum Separately
Company: Ink Tank
List Price:
Amazon Price: $7.71
Used Price: $25.74

HP Laserjet Toner

Laserjet Toner

How To Properly Remanufacture Your HP 2500-2550 Color Toner Cartridges In Just 45 Easy Steps

Laserjet Toner News

Toner leaves mark in losing cause

Toner and Duffy can help make Orchard blossom

US concerned about security in Lebanon

The beauty spot: modern toners

Brother MFC-9125CN Review: Brisk, Affordable Color Laser MFP With Mediocre Color Output

Samsung ML-2165W Review: Simple, Cheap, Compact

Toner and McVerry back / Grugan doubtful